Kansas Bids > Bid Detail
4430-- BED BUG OVEN - TOP VAMC
| Agency: | VETERANS AFFAIRS, DEPARTMENT OF |
|---|---|
| Level of Government: | Federal |
| Category: |
|
| Opps ID: | NBD00159912184537163 |
| Posted Date: | Mar 1, 2023 |
| Due Date: | Mar 6, 2023 |
| Solicitation No: | 36C25523Q0228 |
| Source: | https://sam.gov/opp/3e9377d5b6... |
Follow
Active
Contract Opportunity
Notice ID
36C25523Q0228
Related Notice
Department/Ind. Agency
VETERANS AFFAIRS, DEPARTMENT OF
Sub-tier
VETERANS AFFAIRS, DEPARTMENT OF
Office
255-NETWORK CONTRACT OFFICE 15 (36C255)
Looking for contract opportunity help?
Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.
- Contract Opportunity Type: Presolicitation (Original)
- All Dates/Times are: (UTC-06:00) CENTRAL STANDARD TIME, CHICAGO, USA
- Original Published Date: Mar 01, 2023 09:59 am CST
- Original Response Date: Mar 06, 2023 12:00 pm CST
- Inactive Policy: Manual
- Original Inactive Date: Mar 20, 2023
-
Initiative:
- None
- Original Set Aside: Total Small Business Set-Aside (FAR 19.5)
- Product Service Code: 4430 - INDUSTRIAL FURNACES, KILNS, LEHRS, AND OVENS
-
NAICS Code:
- 333994 - Industrial Process Furnace and Oven Manufacturing
-
Place of Performance:
Colmery-O'Neil VA Medical Center Topeka , KS 66622USA
Statement of Work
Bed Bug Oven
Topeka VA Medical Center Bed bug treatment oven to kill 100% of bed bugs in all life stages, including eggs, nymphs and adults:
Inside self-contained heating cabinet needs to be at least 70"H x 34"W x 22"D.
Unit shall be mounted on casters.
Allow the preprogramming of digital controller with a low temperature (120 degrees) and high
temperature (150 degrees) cut off limits and a set point of 130 degrees.
Bed Bug Oven needs to be designed to kill bedbugs using a heat treatment cycle of 130°F ± 5°F
for a period of 30 minutes.
Oven will need to be designed for a single phase, 120/24OVAC, 20A power feed.
One 240 VAC, 1700W resistive heater is protected by a two pole 10A circuit breaker and two safety thermal switches wired in series.
The temperature of the oven needs to be controlled by a temperature controller in the PLC with a preset temperature set point of 130°F and uses ON/OFF control to reach and maintain the set point.
The feedback transducer to the controller needs to be a Type K thermocouple.
The temperature controller needs to be controlled by the airflow temperature of the oven and
set to a maximum temperature of 170°F.
The fan and control electronics need to be powered by 120 VAC through a 1A and 2A circuit breaker, respectively.
The fan needs to be configured to remain on after the cycle is complete and turn off when the door is opened, or the "STOP/RESET" pushbutton is pressed.
The cycle timing of the heat treatment cycle needs to be initiated when the probe temperature
of the items being treated reaches and maintains 130°F.
When the heat treatment cycle is complete the resistive heaters need to shut off and have a completion indicator.
A spare parts package to consist of 1 each: heater element, thermocouple, over-temperature switch, solid state relay and fan unit.
Bed Bug Oven
Topeka VA Medical Center Bed bug treatment oven to kill 100% of bed bugs in all life stages, including eggs, nymphs and adults:
Inside self-contained heating cabinet needs to be at least 70"H x 34"W x 22"D.
Unit shall be mounted on casters.
Allow the preprogramming of digital controller with a low temperature (120 degrees) and high
temperature (150 degrees) cut off limits and a set point of 130 degrees.
Bed Bug Oven needs to be designed to kill bedbugs using a heat treatment cycle of 130°F ± 5°F
for a period of 30 minutes.
Oven will need to be designed for a single phase, 120/24OVAC, 20A power feed.
One 240 VAC, 1700W resistive heater is protected by a two pole 10A circuit breaker and two safety thermal switches wired in series.
The temperature of the oven needs to be controlled by a temperature controller in the PLC with a preset temperature set point of 130°F and uses ON/OFF control to reach and maintain the set point.
The feedback transducer to the controller needs to be a Type K thermocouple.
The temperature controller needs to be controlled by the airflow temperature of the oven and
set to a maximum temperature of 170°F.
The fan and control electronics need to be powered by 120 VAC through a 1A and 2A circuit breaker, respectively.
The fan needs to be configured to remain on after the cycle is complete and turn off when the door is opened, or the "STOP/RESET" pushbutton is pressed.
The cycle timing of the heat treatment cycle needs to be initiated when the probe temperature
of the items being treated reaches and maintains 130°F.
When the heat treatment cycle is complete the resistive heaters need to shut off and have a completion indicator.
A spare parts package to consist of 1 each: heater element, thermocouple, over-temperature switch, solid state relay and fan unit.
Attachments/Links
Contracting Office Address
- VA MEDICAL CENTER 4101 SOUTH 4TH STREET
- LEAVENWORTH , KS 66048
- USA
Primary Point of Contact
- Ashley Schmitt
- ashley.schmitt@va.gov
- Phone Number 913-946-1974
Secondary Point of Contact
- Mar 01, 2023 10:01 am CST Solicitation (Original)
- Mar 01, 2023 09:59 am CSTPresolicitation (Original)
TRY FOR FREE
Not a USAOPPS Member Yet?
Get unlimited access to thousands of active local, state and federal government bids and awards in All 50 States.